These products contain an acrylic transfer adhesive on the mounting side of the part and PORON Microcellular Urethane on the other. To mount these parts, simply remove the paper liner from the transfer adhesive and press onto a smooth, clean, dry surface, as shown in Figure 1. In order to achieve maximum shielding effectiveness and environmental protection compress part in the direction shown in Figure 2. Once fully compressed, as shown in Figure 3, continuity between the mounting and mating surfaces will be achieved resulting in maximum attenuation and environmental seal from dust, moisture and contamination.
For more information about these or any other products or applications, please contact our Customer Service Department.