Product Highlights: Multi-Functional Straight Contact Series

As one of the most versatile series of parts, the "Contact Series" lends itself to a variety of applications. This series is produced as a flat strips, "U-formed" strips and "U-formed" clip-on strips. In addition, the flat strip and "U-formed" strips can be rolled into rings, of various sizes, in order to accommodate cylindrical applications. All strips can be cut to a specified lengths as required. In order to prevent fracturing or deformation of fingers while functioning, these parts should be mounted so that the deflection forces are applied in one of the directions shown in Figure No. 1. All strips, other than the clip-on strips, can be provided with an attached conductive adhesive transfer tape for ease of mounting. For additional information, please contact our Customer Service department.

Find a Product

Inches Millimeters

Gap: The space between mounting and mating surfaces when in the compressed position.

Gap Size:

Mount Size: The amount of available space for mounting the part, including space for expansion of product when compressed.

Mount Size:

Mount Method: The desired method of attachment (i.e. clip-on, transfer adhesive, conductive transfer adhesive, solder, weld, or the use of hardware)

Mount Method: -- Mount Method --

Resources

• Conductive Adhesive Transfer Tape
• Pressure Sensitive Adhesive Transfer Tape
• Copper Beryllium
• Copper Nickel Tin
• Kimmel Gerke Associates, Ltd.
• IEEE
• RoHS

Contact