no snag slot mount Series

no snag slot mount Series

Part Number: 099-903-00-20

Length:18.0 IN. / 457.2 MM.
The No-Snag Slot-Mount series of parts have a low-force symmetrical shape which is designed to snap into double slot or single slot and edge applications. They perform ideally where bi-directional sli ... read more
Width:0.31 IN. / 7.9 MM.
Offset:0.12 IN. / 3.0 MM.

Part Number: 099-904-00-20

Length:18.0 IN. / 457.2 MM.
The No-Snag Slot-Mount series of parts have a low-force symmetrical shape which is designed to snap into double slot or single slot and edge applications. They perform ideally where bi-directional sli ... read more
Width:0.31 IN. / 7.9 MM.
Offset:0.12 IN. / 3.0 MM.

Part Number: 099-906-00-20

Length:18.0 IN. / 457.2 MM.
The No-Snag Slot-Mount series of parts have a low-force symmetrical shape which is designed to snap into double slot or single slot and edge applications. They perform ideally where bi-directional sli ... read more
Width:0.62 IN. / 15.7 MM.
Offset:0.25 IN. / 6.4 MM.

Part Number: 098-931-00-20

Length:17.95 IN. / 455.9 MM.
The No-Snag Slot-Mount series of parts is designed to snap into double slot or single slot and edge applications. They perform ideally where bi-directional sliding compression is required. Part number ... read more
Width:0.32 IN. / 8.1 MM.
Offset:0.11 IN. / 2.8 MM.

Part Number: 099-931-00-20

Length:17.95 IN. / 455.9 MM.
The No-Snag Slot-Mount series of parts is designed to snap into double slot or single slot and edge applications. They perform ideally where bi-directional sliding compression is required. Part number ... read more
Width:0.32 IN. / 8.1 MM.
Offset:0.11 IN. / 2.8 MM.

Part Number: 089-933-00-20

Length:17.95 IN. / 455.9 MM.
The No-Snag Slot-Mount series of parts have a low-force symmetrical shape which is designed to snap into double slot or single slot and edge applications. They perform ideally where bi-directional sli ... read more
Width:0.32 IN. / 8.1 MM.
Offset:0.10 IN. / 2.5 MM.

Part Number: 096-904-00-20

Length:18.0 IN. / 457.2 MM.
Part number 096-904-00 is the CU-NI-SN version of part number 099-904-00 and is available in a variety of surface finishes to accommodate adjacent surface finishes and in lengths up to 18\" in increme ... read more
Width:0.31 IN. / 7.9 MM.
Offset:0.12 IN. / 3.0 MM.

Part Number: 096-931-00-20

Length:17.95 IN. / 455.9 MM.
Part number 096-931-00 is the CU-NI-SN version of part number 099-931-00 and is provided with a low-force symmetrical shape and a dual web construction for strip continuity and finger attachment. It i ... read more
Width:0.32 IN. / 8.1 MM.
Offset:0.11 IN. / 2.8 MM.

Find a Product

Inches Millimeters
Product Catalog