No-Snag Series

With a fold-under finger tip design this series of RFI EMI shielding products provide an added level of protection against finger damage and a lower coefficient of friction resulting in minimal force requirements through the deflection range. This series of fingerstock is ideal for high traffic areas and are available for mounting material thicknesses from 0.025" thru 0.115".

With a symmetrical design this series of RF shielding products is simply mounted by using a snap-in, slot mount installation. The symmetrical configuration allows bidirectional engagement which makes them an excellent choice for "sliding" applications.

Similar to the No-Snag Slot-Mount Series of RFI EMI shielding products with an added feature which provides for strip mounting at every other, every fourth or every sixth finger location. These fingerstock parts are an excellent solution for low force and small deflection range applications.

Ideal solution for shielding applications requiring low compression force. Designed with minimal residual stress and highly leveraged spring action. The free end features fold-under fingers which facilitate a low coeffient of friction on most surfaces. Requires a minimum amount of compression force to move through its deflection range, resulting in the highest levels of EMI RFI shielding effectiveness with minimal force.

A typical slot-mount shielding application is shown below on an electric enclosure. Follow the dimensional specifications shown at left and in the chart below for the optimum installation performance. Note: the \"J-slot\" length per application in multiples of \"C\" dimension plus .010\" (0,25mm). See No-Snag Parts on the No-Snag Series Page.