Twist sub Series: 099-210-NT-20

twist sub Series: 099-210-NT-20
The Twist series of parts provide a small dynamic range of deflection and do not extend beyond their free position width when compressed. They can be compressed to near flat allowing for minimal gap between mounting and mating surfaces. Part number 099-210-NT is provided without a transfer adhesive allowing for other means of attachment, and is available in a variety of surface finishes to accommodate adjacent surface finishes. This item is available in coils under 100 ft and in continuous length on reels from 100 ft.

Specifications

Drawing

Part Number:
099-210-NT-20
Number of Fingers:
146
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
0.36
Min. Mounting:
9.1
Min. Gap Size:
0.01
Min. Gap Size:
0.3
Max. Gap Size:
0.05
Max. Gap Size:
1.3
Pitch:
0.165
Pitch:
4.19
Slot:
0.015
Slot:
0.38
Finger:
0.150
Finger:
3.81
Width:
0.34
Width:
8.6
Offset:
0.07
Offset:
1.8
Length:
24.09
Length:
611.9
Thickness:
0.0030
Thickness:
0.076
Flat Section:
n/a
Flat Section:
n/a
Clip-On:
n/a
Clip-On:
n/a
Min. Mounting Thickness:
n/a
Min. Mounting Thickness:
n/a
Part Number: 099-210-NT-20
0.165
0.015
0.150
0.34
0.07
24.09
No Tape (NT)

Get a quote on this part

* = Required Field