Twist right angle Series: 099-251-NT-20

twist right angle Series: 099-251-NT-20
The Twist Right-Angle series of parts provide the ability of being side mounted, mounted around corners or in a groove. They can be used for contact with surfaces that are perpendicular or parallel to the mounting surface and be compressed to near flat. Part number 099-251-NT is the smallest part in this series which is provided without a transfer adhesive allowing for other means of attachment, and is available in a variety of surface finishes to accomodate adjacent surface finishes.

Specifications

Drawing

Part Number:
099-251-NT-20
Number of Fingers:
250
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
0.1
Min. Mounting:
2.5
Min. Gap Size:
0.01
Min. Gap Size:
0.3
Max. Gap Size:
0.02
Max. Gap Size:
0.5
Pitch:
0.096
Pitch:
2.44
Slot:
0.015
Slot:
0.38
Finger:
0.081
Finger:
2.06
Width:
0.08
Width:
2
Offset:
0.03
Offset:
0.8
Length:
24.0
Length:
609.6
Thickness:
0.0027
Thickness:
0.069
Flat Section:
0.18
Flat Section:
4.6
Clip-On:
n/a
Clip-On:
n/a
Min. Mounting Thickness:
n/a
Min. Mounting Thickness:
n/a
Part Number: 099-251-NT-20
0.096
0.015
0.081
0.08
0.03
24.0
No Tape (NT)
0.18

Get a quote on this part

* = Required Field