Right angle sub Series: 099-745-NT-20

right angle sub Series: 099-745-NT-20
The Right-Angle series of parts provide the ability of being mounted around corners or in a groove. They can also be used for contact with surfaces that are perpendicular or parallel to the mounting surface. Part number 099-745-NT is the smallest part in this series, is provided without an adhesive but with mounting holes for mechanical fastening, and is available in a variety of surface finishes to accomodate adjacent surface finishes.

Specifications

Drawing

Part Number:
099-745-NT-20
Number of Fingers:
85
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
0.3
Min. Mounting:
7.6
Min. Gap Size:
0.04
Min. Gap Size:
1
Max. Gap Size:
0.08
Max. Gap Size:
2
Pitch:
0.188
Pitch:
4.78
Slot:
0.018
Slot:
0.46
Finger:
0.170
Finger:
4.32
Width:
0.28
Width:
7.1
Offset:
0.11
Offset:
2.8
Length:
15.98
Length:
405.9
Thickness:
0.0027
Thickness:
0.076
Flat Section:
0.35
Flat Section:
8.9
Clip-On:
n/a
Clip-On:
n/a
Min. Mounting Thickness:
n/a
Min. Mounting Thickness:
n/a
Part Number: 099-745-NT-20
0.188
0.018
0.170
0.28
0.11
15.98
No Tape (NT)
0.35

Get a quote on this part

* = Required Field