No snag sub Series

no-snag-sub Series
Ideal solution for shielding applications requiring low compression force. Designed with minimal residual stress and highly leveraged spring action. The free end features fold-under fingers which facilitate a low coeffient of friction on most surfaces. Requires a minimum amount of compression force to move through its deflection range, resulting in the highest levels of EMI RFI shielding effectiveness with minimal force.

Part Number: 089-993-NT-20

  • Length:16.0 IN. / 406.4 MM.
  • Width:0.60 IN. / 15.2 MM.
  • Offset:0.12 IN. / 3.0 MM.

Part Number: 089-994-NT-20

  • Length:16.0 IN. / 406.4 MM.
  • Width:0.55 IN. / 14.0 MM.
  • Offset:0.15 IN. / 3.8 MM.

Part Number: 099-930-NT-20

  • Length:18.0 IN. / 457.2 MM.
  • Width:0.31 IN. / 7.9 MM.
  • Offset:0.12 IN. / 3.0 MM.
The No-Snag series of parts have a low force fold-under finger design to provide smooth continuity between the mating and the mounting surfaces while minimizing the possibility of finger damage. Part number 099-930-NT is provided without a transfer a ... read more

Part Number: 099-932-NT-20

  • Length:18.0 IN. / 457.2 MM.
  • Width:0.33 IN. / 8.4 MM.
  • Offset:0.10 IN. / 2.5 MM.
The No-Snag series of parts have a low force fold-under finger design to provide smooth continuity between the mating and the mounting surfaces while minimizing the possibility of finger damage. Part number 099-932-NT is provided without a transfer a ... read more

Part Number: 099-940-NT-20

  • Length:18.0 IN. / 457.2 MM.
  • Width:0.31 IN. / 7.9 MM.
  • Offset:0.12 IN. / 3.0 MM.
The No-Snag series of parts have a low force fold-under finger design to provide smooth continuity between the mating and the mounting surfaces while minimizing the possibility of finger damage. Part number 099-940-NT is provided without a transfer a ... read more

Part Number: 099-960-NT-20

  • Length:18.0 IN. / 457.2 MM.
  • Width:0.61 IN. / 15.5 MM.
  • Offset:0.25 IN. / 6.4 MM.
The No-Snag series of parts have a low force fold-under finger design to provide smooth continuity between the mating and the mounting surfaces while minimizing the possibility of finger damage. Part number 099-960-NT is provided without a transfer a ... read more

Part Number: 095-960-NT-20*

  • Length:18.0 IN. / 457.2 MM.
  • Width:0.61 IN. / 15.5 MM.
  • Offset:0.25 IN. / 6.4 MM.
Part number 095-960-NT is the Stainless Steel version of part number 099-960-NT and is provided without a transfer adhesive allowing for other means of attachment. It is available in a variety of surface finishes to accommodate adjacent surface finis ... read more
* = Special Order Only