No snag clip on Series: 099-945-06-20

no snag clip on Series: 099-945-06-20
The No-Snag Clip-On series of parts have a low force fold-under finger design to provide smooth interaction with the mounting surface and minimize the possibility of finger damage. They are easily mounted onto a flange or edge by simply pressing into position. Part number 099-945-06 is provided without retaining lances for smooth mounting without marring the mounting surface. It is designed to clip onto 0.035"-0.055" thick material and provide smooth engagement with the mating surface. It is available in a variety of surface finishes to accomodate adjacent surface finishes and can be provided in lengths up to 18" in increments of 0.50".

Specifications

Drawing

Part Number:
099-945-06-20
Number of Fingers:
72
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
0.48
Min. Mounting:
12.2
Min. Gap Size:
0.06
Min. Gap Size:
1.5
Max. Gap Size:
0.09
Max. Gap Size:
2.3
Pitch:
0.500
Pitch:
6.35
Slot:
0.020
Slot:
0.51
Finger:
0.230
Finger:
5.84
Width:
0.46
Width:
11.7
Offset:
0.12
Offset:
3
Length:
18.0
Length:
457.2
Thickness:
0.0027
Thickness:
0.069
Flat Section:
n/a
Flat Section:
n/a
Clip-On:
0.06
Clip-On:
1.5
Min. Mounting Thickness:
0.035-0.055
Min. Mounting Thickness:
0.89-1.40
Part Number: 099-945-06-20
0.500
0.020
0.230
0.46
0.12
18.0
0.035"-0.055" (0,89-1,40 mm) Thick Mounting Flange
0.06

Get a quote on this part

* = Required Field