Mini twist clip on Series: 099-253-06-20

mini twist clip on Series: 099-253-06-20
The Mini-Twist Clip-On series of parts provide a very small dynamic range of deflection and do not extend beyond their free position width when compressed. They are designed for flange or edge mounting by simply pressing into position. Part number 099-253-06 is the smallest part in this series which does not have retaining lances for smooth mounting without marring the mounting surface, was specifically designed to fit on material thicknesses ranging from 0.035" to 0.055", and is available in a variety of surface finishes to accomodate adjacent surface finishes.

Specifications

Drawing

Part Number:
099-253-06-20
Number of Fingers:
167
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
0.17
Min. Mounting:
4.3
Min. Gap Size:
0.01
Min. Gap Size:
0.3
Max. Gap Size:
0.02
Max. Gap Size:
0.5
Pitch:
0.096
Pitch:
2.44
Slot:
0.015
Slot:
0.38
Finger:
0.081
Finger:
2.06
Width:
0.15
Width:
3.8
Offset:
0.03
Offset:
0.8
Length:
16.03
Length:
407.2
Thickness:
0.0027
Thickness:
0.069
Flat Section:
n/a
Flat Section:
n/a
Clip-On:
0.06
Clip-On:
1.5
Min. Mounting Thickness:
0.035-0.055
Min. Mounting Thickness:
0.89-1.40
Part Number: 099-253-06-20
0.096
0.015
0.081
0.15
0.03
16.03
0.035"-0.055" (0,89-1,40 mm) Thick Mounting Flange
0.06

Get a quote on this part

* = Required Field