Coil & continuous length Series: Coil-099-400-00-20

coil & continuous length Series: Coil-099-400-00-20
The Hi-Deflection series was specifically designed to provide an EMI/RFI shielding solution for electronic enclosure door frames. It is available in coils under 100 feet and in continuous length on plastic reels from 100 feet. There are 0.142" diameter mounting holes to accommodate mechanical fastening with rivets or screws. A variety of surface finishes are available to accommodate mounting and mating surface finishes. When ordering a length less than 100 feet add the letter "C" followed by the desired number of feet at the end of the part number (i.e. 099-400-00-20C25). When ordering a continuous length of 100 feet or more, place the letter "R" at the end of the part number (i.e. 099-400-00-20R) and specify the number of feet as the order quantity.

Specifications

Drawing

Part Number:
Coil-099-400-00-20
Number of Fingers:
800
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
1.12
Min. Mounting:
28.4
Min. Gap Size:
0.06
Min. Gap Size:
1.5
Max. Gap Size:
0.19
Max. Gap Size:
4.8
Pitch:
0.375
Pitch:
9.53
Slot:
0.040
Slot:
1.02
Finger:
0.335
Finger:
8.51
Width:
1.1
Width:
27.9
Offset:
0.26
Offset:
6.6
Length:
300
Length:
7620
Thickness:
0.0045
Thickness:
0.114
Flat Section:
n/a
Flat Section:
n/a
Clip-On:
n/a
Clip-On:
n/a
Min. Mounting Thickness:
n/a
Min. Mounting Thickness:
n/a
Part Number: Coil-099-400-00-20
0.375
0.040
0.335
1.1
0.26
300
Solder / Weld / Hardware

Get a quote on this part

* = Required Field