Coil & continuous length Series: Coil-099-250-NT-20

coil & continuous length Series: Coil-099-250-NT-20
The Mini-Twist series of parts provide a very small dynamic range of deflection and do not extend beyond their free position width when compressed. They take up a minimal amount of mounting space and can be compressed to near flat allowing for minimal gap between mounting and mating surfaces. Part number 099-250-NT is provided without a transfer adhesive allowing for other means of attachment, and is available in a variety of surface finishes to accommodate adjacent surface finishes. This item is available in coils under 100 ft and in continuous length on reels from 100 ft. When ordering a length less than 100 feet add the letter "C" followed by the desired number of feet at the end of the part number (i.e. 099-250-NT-20C25). When ordering a continuous length of 100 feet or more, place the letter "R" at the end of the part number (i.e. 099-250-NT-20R) and specify the number of feet as the order quantity.

Specifications

Drawing

Part Number:
Coil-099-250-NT-20
Number of Fingers:
250
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
0.25
Min. Mounting:
6.4
Min. Gap Size:
0.01
Min. Gap Size:
0.3
Max. Gap Size:
0.02
Max. Gap Size:
0.5
Pitch:
0.096
Pitch:
2.44
Slot:
0.015
Slot:
0.38
Finger:
0.081
Finger:
2.06
Width:
0.23
Width:
5.8
Offset:
0.03
Offset:
0.8
Length:
24.0
Length:
609.6
Thickness:
0.0030
Thickness:
0.076
Flat Section:
n/a
Flat Section:
n/a
Clip-On:
n/a
Clip-On:
n/a
Min. Mounting Thickness:
n/a
Min. Mounting Thickness:
n/a
Part Number: Coil-099-250-NT-20
0.096
0.015
0.081
0.23
0.03
24.0
No Tape (NT)

Get a quote on this part

* = Required Field