Coil & continuous length Series: Coil-095-220-NT-20

coil & continuous length Series: Coil-095-220-NT-20
Part number 095-220-NT is the Stainless Steel version of part number 099-220-NT and is provided without a transfer adhesive allowing for other means of attachment. It is available in a variety of surface finishes to accommodate adjacent surface finishes. This item is available in coils under 100 ft and in continuous length on reels from 100 ft. When ordering a length less than 100 feet add the letter "C" followed by the desired number of feet at the end of the part number (i.e. 095-220-NT-20C25). When ordering a continuous length of 100 feet or more, place the letter "R" at the end of the part number (i.e. 095-220-NT-20R) and specify the number of feet as the order quantity.

Specifications

Drawing

Part Number:
Coil-095-220-NT-20
Number of Fingers:
146
Lance:
n/a
Trimmed Finger Tips:
n/a
Inches
Millimeters
Min. Mounting:
0.52
Min. Mounting:
13.2
Min. Gap Size:
0.01
Min. Gap Size:
0.3
Max. Gap Size:
0.05
Max. Gap Size:
1.6
Pitch:
0.165
Pitch:
4.19
Slot:
0.015
Slot:
0.38
Finger:
0.150
Finger:
3.81
Width:
0.50
Width:
12.7
Offset:
0.07
Offset:
1.8
Length:
24.09
Length:
611.9
Thickness:
0.0030
Thickness:
0.076
Flat Section:
n/a
Flat Section:
n/a
Clip-On:
n/a
Clip-On:
n/a
Min. Mounting Thickness:
n/a
Min. Mounting Thickness:
n/a
Part Number: Coil-095-220-NT-20
0.165
0.015
0.150
0.50
0.07
24.09
No Tape (NT)

Get a quote on this part

* = Required Field