Coil & continuous length Series

Part Number: Coil-099-400-00-20

  • Length:300 IN. / 7620 MM.
  • Width:1.1 IN. / 27.9 MM.
  • Offset:0.26 IN. / 6.6 MM.
The Hi-Deflection series was specifically designed to provide an EMI/RFI shielding solution for electronic enclosure door frames. It is available in coils under 100 feet and in continuous length on plastic reels from 100 feet. There are 0.142" diamet ... read more

Part Number: Coil-099-200-NT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.30 IN. / 7.6 MM.
  • Offset:0.07 IN. / 1.8 MM.
The Twist series of parts provide a small dynamic range of deflection and do not extend beyond their free position width when compressed. They can be compressed to near flat allowing for minimal gap between mounting and mating surfaces. Part number 0 ... read more

Part Number: Coil-099-210-NT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.34 IN. / 8.6 MM.
  • Offset:0.07 IN. / 1.8 MM.
The Twist series of parts provide a small dynamic range of deflection and do not extend beyond their free position width when compressed. They can be compressed to near flat allowing for minimal gap between mounting and mating surfaces. Part number 0 ... read more

Part Number: Coil-099-250-NT-20

  • Length:24.0 IN. / 609.6 MM.
  • Width:0.23 IN. / 5.8 MM.
  • Offset:0.03 IN. / 0.8 MM.
The Mini-Twist series of parts provide a very small dynamic range of deflection and do not extend beyond their free position width when compressed. They take up a minimal amount of mounting space and can be compressed to near flat allowing for minima ... read more

Part Number: Coil-099-220-NT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.5 IN. / 12.7 MM.
  • Offset:0.07 IN. / 1.8 MM.
The Dual-Twist series of parts contain a double row of contact fingers in one narrow strip which provide a small dynamic range of deflection and do not extend beyond their free position width when compressed. They can be compressed to near flat allow ... read more

Part Number: Coil-095-210-NT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.34 IN. / 8.6 MM.
  • Offset:0.07 IN. / 1.8 MM.
Part number 095-210-NT is the Stainless Steel version of part number 099-210-NT and is provided without a transfer adhesive allowing for other means of attachment. It is available in a variety of surface finishes to accommodate adjacent surface finis ... read more

Part Number: Coil-095-220-NT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.50 IN. / 12.7 MM.
  • Offset:0.07 IN. / 1.8 MM.
Part number 095-220-NT is the Stainless Steel version of part number 099-220-NT and is provided without a transfer adhesive allowing for other means of attachment. It is available in a variety of surface finishes to accommodate adjacent surface fini ... read more

Part Number: Coil-099-200-PT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.30 IN. / 7.6 MM.
  • Offset:0.07 IN. / 1.8 MM.
In addition to providing excellent EMI/RFI shielding effectiveness the Enviro-Twist series of parts contain a Poron rubber gasket for added environmental protection against dust and other contaminates. Part number 099-200-PT is provided with a transf ... read more

Part Number: Coil-099-210-PT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.34 IN. / 8.6 MM.
  • Offset:0.07 IN. / 1.8 MM.
In addition to providing excellent EMI/RFI shielding effectiveness the Enviro-Twist series of parts contain a Poron rubber gasket for added environmental protection against dust and other contaminates. Part number 099-210-PT is provided with a transf ... read more

Part Number: Coil-099-220-PT-20

  • Length:24.09 IN. / 611.9 MM.
  • Width:0.50 IN. / 12.7 MM.
  • Offset:0.07 IN. / 1.8 MM.
In addition to providing excellent EMI/RFI shielding effectiveness the Enviro-Twist series of parts contain a Poron rubber gasket for added environmental protection against dust and other contaminates. Part number 099-220-PT is provided with a transf ... read more
* = Special Order Only