Home > Products > twist right angle Series > 099-211-NT

The Twist Right-Angle series of parts provide the ability of being side mounted, mounted around corners or in a groove. They can be used for contact with surfaces that are perpendicular or parallel to the mounting surface and be compressed to near flat. Part number 099-211-NT is provided without a transfer adhesive allowing for other means of attachment, and is available in a variety of surface finishes to accomodate adjacent surface finishes.

Part Specifications

Part Number:	099-211-NT
Number of Fingers:	146
Lance:	n/a
Trimmed Finger Tips:	n/a
Inches		Millimeters
Min. Mounting:	0.15	Min. Mounting:	3.8
Min. Gap Size:	0.01	Min. Gap Size:	0.3
Max. Gap Size:	0.05	Max. Gap Size:	1.3
Pitch:	0.165	Pitch:	4.19
Slot:	0.015	Slot:	0.38
Finger:	0.15	Finger:	3.81
Width:	0.13	Width:	3.3
Offset:	0.07	Offset:	1.8
Length:	24.09	Length:	611.9
Thickness:	0.003	Thickness:	0.076
Flat Section:	0.27	Flat Section:	6.9
Clip-On:	n/a	Clip-On:	n/a
Min. Mounting Thickness:	n/a	Min. Mounting Thickness:	n/a

OR

Get a quote on this part

Name:
Last Name:
Company Name:
Address:
City:
State:
Zip:
Country:
Email Address:
Phone Number:
Quantity:

Find a Product

-- Unit of Measure -- Inches Millimeters -- Gap Size -- -- Mount Size -- -- Mount Method --

Resources

• Conductive Adhesive Transfer Tape
• Pressure Sensitive Adhesive Transfer Tape
• Copper Beryllium
• Copper Nickel Tin
• Kimmel Gerke Associates, Ltd.
• IEEE
• RoHS

Contact